EP Series – Explosion Proof Motors – 3 Phase | ATT Electric Motor EP Series – Explosion Proof Motors

EP Series – Explosion Proof Motors – 3 Phase

EP series three phase explosion proof motors are uniquely designed and built to contain the sparks within the motor to prevent ignition of external combustible vapours contained in the surrounding atmosphere. The explosion proof characteristic enables the motor to be safely used in hazardous environments.

Certifications:
ATEX EExd IIB T4 or EExd I
ATEX EExd IIC T4

Other Spec :

https://www.attelectricmotor.co.id/products/we-series-high-efficiency-ie2-3-phase-cast-iron-induction-motor/

Item	Standard Specifications
Type of Motor	Totally-enclosed fan-cooled squirrel cage induction motor
Design standards	German DIN42673 IEC79-1, BS4683, EN50018
Time Duty	Continuous S1, MCR (S.F:1.0)
Cooling Method	self external fan, surface cooling (IC 411)
Method of Starting	Full voltage direct on line starting or star-delta starting
Mounting	Horizontal foot mounting, flange mounting: B3. B5. B14, B35, V1
Insulation class & Temperate Rise	Adopting class F insulation and checking permissible limits of temperature rise against that of class B to improve the insulation reliability
Rotor Winding	Squirrel cage, aluminium conductor with end-ring and wafter blades integrally cast
Environmental Conditions	Place: Hazardous Location
	Ambient temperature: -20°C to 40°C
	Relative humidity: Less than 90% RH(non-condensation)
	Altitude: Up to 1,000 metres above sea level
Drive Method	Belt service (Note: Frame Size 225 and above is for coupling drive)
Direction of Rotation	Standard motors are suitable for operation in either direction of rotation. Direction of rotation of motor can be reversed by interchanging any two of the power lines
Shaft	Carbon Steel, round shaft with key
Bearing	Grease pre-packed shielded ball bearing
Lubrication	Lithium-base grease
Painting	High quality enamel finish, standard colors is light blue with other colors available on request.
Nameplate	Stainless steel
Ground Terminal	NE set inside the terminal box

Performance Data for 50Hz
Rated Power		Pole	Frame Size	Rated Speed	Current			Power Factor	Efficiency	Locked Rotor Current /	Locked Rotor Torque /	Breakdown Torque /	Rated Torque	Moment of Inertia	Weight
Rated Power				(RPM)	IFL (A)			(COSØ)	(%)	Full Load Current	Full Load Torque	Full Load Torque	(TFL) Nm	(JKgm²)	(Kg)
KW	HP				380V	400V	415V			(ILR/IFL)	(TLR/TFL)	(TM/TFL)
0.55	0.75	4	80-1	1390	1.57	1.49	1.44	71	0.75	5	2.4	2.3	3.78	0.01	22
0.75	1	2	80-1	2825	1.83	1.74	1.68	75	0.83	6	2.2	2.3	2.54	0	22
0.75	1	4	80-2	1390	2.03	1.93	1.86	73	0.77	5	2.4	2.3	5.15	0.01	24
1.1	1.5	2	80-2	2825	2.55	2.42	2.33	78	0.84	6	2.2	2.3	3.72	0.01	24
1.1	1.5	4	90S	1400	2.89	2.75	2.65	75	0.77	6	2.3	2.3	7.5	0.01	33
1.5	2	2	90S	2840	3.43	3.26	3.14	79	0.84	7	2.2	2.3	5.04	0.01	33
1.5	2	4	90S	1400	2.89	2.75	2.65	75	0.77	6	2.3	2.3	10.23	0.01	33
2.2	3	2	90L	2840	4.85	4.61	4.44	81	0.85	7	2.2	2.3	7.4	0.01	37
2.2	3	4	90L	1400	3.71	3.52	3.39	78	0.79	6	2.3	2.3	15.01	0.02	37
3	4	2	100L	2880	6.24	5.93	5.72	83	0.88	7	2.2	2.3	9.95	0.02	43
3	4	4	100L-2	1420	5.16	4.9	4.72	80	0.81	6	2.3	2.4	20.18	0.03	43
4	5.5	2	112M	2890	8.12	7.71	7.43	85	0.88	7	2.2	2.3	13.22	0.03	54
		4	112M	1440	8.82	8.38	8.08	84	0.82	6	2.3	2.4	26.53	0.06	58
		8	160M-1	720	10.31	9.79	9.44	81	0.73	6	1.9	2.2	53.06	0.32	132
5.5	7.5	2	132S-1	2900	11	10.45	10.07	86	0.88	7.5	2.2	2.3	18.11	0.06	79
		4	132S	1440	11.6	11.02	10.62	86	0.84	7	2.3	2.4	36.48	0.11	80
		8	160M-2	720	13.4	12.73	12.27	83	0.75	6	1.9	2.2	72.95	0.46	144
7.5	10	2	132S-2	2900	14.91	14.16	13.65	87	0.88	7.5	2.2	2.3	24.7	0.07	87
		4	132M	1440	15.4	14.63	14.1	87	0.85	7	2.3	2.4	49.74	0.17	95
		6	160M	970	16.8	15.96	15.38	86	0.79	6.5	2.1	2.4	73.84	0.46	154
		8	160L	720	17.6	16.72	16.12	85	0.76	6	1.9	2.2	99.48	0.61	175
11	15	2	160M-1	2930	21.51	20.43	19.69	88.4	0.88	7.5	2.2	2.4	35.85	0.21	140
		4	160M	1460	22.31	21.19	20.42	88	0.85	7	2.2	2.4	71.95	0.36	150
		6	160L	970	24.2	22.99	22.16	87.5	0.79	6.5	2.1	2.4	108.3	0.61	176
		8	180L	730	25.31	24.04	23.17	87	0.76	6	1.9	2.2	143.9	1.06	225
15	20	2	160M-2	2930	28.6	27.17	26.19	89.4	0.89	7.5	2.2	2.4	48.89	0.25	152
		4	160L	1460	30.11	28.6	27.57	89	0.85	7	2.2	2.4	98.12	0.42	168
		6	180L	970	31.6	30.02	28.93	89	0.81	7	2.1	2.1	147.68	1.01	225
		8	200L	730	33.71	32.02	30.86	89	0.76	6.5	2	2.2	196.23	1.6	315
18.5	25	2	160L	2930	35.11	33.35	32.14	90	0.89	7.5	2.2	2.4	60.3	0.31	168
		4	180M	1470	36.51	34.68	33.43	90.5	0.85	7	2.2	2.3	120.19	0.68	220
		6	200L-1	970	37.6	35.72	34.43	90	0.83	7	2.2	2.4	182.14	1.62	290
		8	225S	730	40	38	36.63	90	0.78	6.5	2	2.2	242.02	2.28	375
22	30	2	180M	2940	41	38.95	37.54	90.5	0.9	7.5	2	2.3	71.46	0.37	220
		4	180L	1470	43.11	40.95	39.47	91.2	0.85	7	2.2	2.3	142.93	0.7	242
		6	200L-2	970	44.71	42.47	40.93	90	0.83	7	2.2	2.4	216.6	1.84	315
		8	225M	730	47.4	45.03	43.4	90.5	0.78	6.5	2	2.2	287.81	2.74	395
30	40	2	200L-1	2950	55.4	52.63	50.73	91.4	0.9	7.5	2	2.4	97.12	0.63	290
		4	200L	1470	57.6	54.72	52.74	92	0.86	7.2	2.2	2.4	194.9	0.81	335
		6	225M	980	57.6	54.72	52.74	92	0.86	7	2.1	2.4	292.35	2.43	410
		8	250M	730	63.4	60.23	58.05	91	0.79	6.5	1.9	2	392.47	3.67	530
37	50	2	200L-2	2950	67.91	64.51	62.18	92	0.9	7.5	2	2.4	119.78	0.73	305
		4	225S	1480	69.91	66.41	64.01	92.5	0.87	7.2	2.2	2.4	238.75	1.21	400
		6	250M	980	71	67.45	65.01	92	0.86	7	2.1	2.4	360.56	2.68	525
		8	280S	740	77.8	73.91	71.24	91.5	0.79	6	1.8	2	477.5	5.16	605
45	60	2	225M	2970	82.11	78	75.18	92.5	0.9	7.5	2	2.3	144.7	1.28	400
		4	225M	1480	84.71	80.47	77.56	92.8	0.87	7.2	2.2	2.4	290.37	1.85	415
		6	280S	980	85.91	81.61	78.66	92.5	0.86	7	2.1	2.4	438.52	3.46	635
		8	280M	740	94.11	89.4	86.17	92	0.79	6	1.8	2	580.74	5.82	700
55	75	2	250M	2970	99.8	94.81	91.38	93	0.9	7.5	2.1	2.3	176.85	1.55	460
		4	250M	1480	103.31	98.14	94.59	93	0.87	7.2	2.2	2.4	354.9	2.32	560
		6	280M	980	104.71	99.47	95.87	92.8	0.86	7	2.1	2.3	535.97	3.97	730
		8	315S	740	111.2	105.64	101.82	92.8	0.81	6.5	1.9	2.2	709.8	6.74	920
75	100	2	280S	2970	133.8	127.11	122.52	93.6	0.91	7.5	2	2.3	241.16	1.89	625
		4	280S	1480	139.6	132.62	127.83	93.8	0.87	7.2	2.2	2.4	483.95	2.86	665
		6	315S	985	141.71	134.62	129.75	93.5	0.86	7	2	2.2	727.16	4.57	1080
		8	315M	740	151.31	143.74	138.54	93	0.81	6.5	1.9	2.2	967.91	7.35	1100
90	125	2	280M	2970	160	152	146.51	93.9	0.91	7.5	2.1	2.3	289.39	2.02	728
		4	280M	1485	166.8	158.46	152.73	94.2	0.87	7.2	2.2	2.4	578.79	3.34	780
		6	315M	985	169.51	161.03	155.21	93.8	0.86	7	2	2.2	872.59	4.83	1140
		8	315L-1	740	177.8	168.91	162.8	93.8	0.82	6.5	1.9	2.2	1161.49	8.79	1120
110	150	2	315S	2980	195.4	185.63	178.92	94	0.91	7	1.8	2.3	352.52	2.26	1100
		4	315S	1485	198.71	188.77	181.95	94.5	0.89	7	2.1	2.4	707.41	4.68	1150
		6	315L-1	985	206.71	196.37	189.27	94	0.86	7	2	2.2	1066.5	5.32	1310
		8	315L-2	740	216.8	205.96	198.52	94	0.82	6.5	1.9	2.2	1419.59	9.18	1300
132	180	2	315M	2980	233.2	221.54	213.53	94.5	0.91	7	1.8	2.3	423.02	2.42	1160
		4	315M	1485	237.71	225.82	217.66	94.8	0.89	7	2.1	2.4	848.89	4.96	1200
		6	315L-2	985	244.71	232.47	224.07	94.2	0.87	7	2	2.2	1279.8	5.95	1400
		8	355S	740	259.6	246.62	237.71	94.2	0.82	6.5	2	2.2	1703.51	10.19	1640
160	215	2	315L-1	2980	279.31	265.34	255.75	94.6	0.92	7	1.8	2.3	512.75	2.76	1350
		4	315L-1	1485	284.31	270.09	260.33	95	0.9	7	2.1	2.4	1028.96	5.22	1320
		6	355S	985	292.31	277.69	267.65	94.5	0.88	7	2	2.2	1551.27	7.32	1650
		8	355M	740	313.4	297.73	286.97	94.6	0.82	6.5	2	2.2	2064.86	11.24	1820
185	250	2	315L	2980	323	306.85	295.76	94.6	0.92	7	1.8	2.3	592.87	3.22	1500
		4	315L	1485	328.71	312.27	300.98	95	0.9	7	2.1	2.4	1189.73	5.43	1420
		6	355M-1	985	338	321.1	309.49	94.5	0.88	7	2	2.2	1793.65	7.89	1760
		8	355L-1	740	362.31	344.19	331.75	94.6	0.82	6.5	2	2.2	2387.5	12.48	2100
200	270	2	315L-2	2980	348.4	330.98	319.02	94.8	0.92	7	1.8	2.3	640.94	3.41	1600
		4	315L-2	1485	354.6	336.87	324.69	95.2	0.9	7	2.1	2.3	1286.2	5.62	1500
		6	355M-2	985	364.6	346.37	333.85	94.7	0.88	7	2	2.2	1939.09	8.17	1970
		8	355L-2	740	386.2	366.89	353.63	94.8	0.83	6.5	2	2.2	2581.08	13.56	220
220	295	2	355M-1	2980	383.2	364.04	350.88	94.8	0.92	7	1.6	2.4	705.03	5.46	1840
		4	355M-1	1488	390.11	370.6	357.2	95.2	0.9	7	2.1	2.4	1411.96	6.88	1830
		6	355L-1	985	401.11	381.05	367.28	94.7	0.88	7	2	2.2	2132.99	8.25	2140
250	340	2	355M-2	2980	433.2	411.54	396.67	95.3	0.92	7	1.6	2.4	801.17	6.22	2100
		4	355M-2	1488	441.91	419.81	404.64	95.5	0.9	7	2.1	2.4	1604.5	7.22	1940
		6	355L-2	985	454.31	431.59	415.99	95	0.88	7	2	2.2	2423.86	8.36	2250
280	380	2	355L-1	2980	485.2	460.94	444.28	95.3	0.92	7	1.6	2.4	897.32	6.54	2260
280	380	4	355L-1	1488	494.91	470.16	453.17	95.5	0.9	7	2.1	2.4	1797.04	7.46	2080
315	425	2	355L-2	2980	544.11	516.9	498.22	95.6	0.92	7	1.6	2.4	1009.48	6.95	2320
315	425	4	355L-2	1488	556.2	528.39	509.29	95.6	0.9	7	2.1	2.4	2021.67	7.68	2260

related product

Sorry, we couldn't find any posts. Please try a different search.